Abazadeh, Babak
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2020, Pages 571-580]
Abbandanak, S. Navid Hosseini
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2020, Pages 495-502]
Abbasnia, Ali
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Abdollahi -Azghan, Mehdi
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2020, Pages 541-548]
Abdollah-zadeh, Amir
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Abdollah-Zadeh, Amir
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Abdullahi, Elghar
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Abdullah Mirzaie, Rasool
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Afzali, Daryoush
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
Aghamohammadi, Hamed
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2020, Pages 495-502]
Ahangaran, Fatemeh
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Ahmadi, Hamed
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Akbari, Ashkan
Dynamic response of FG rectangular plate in contact with stationary fluid under moving load [Volume 6, Issue 2, 2019, Pages 213-224]
Aliakbarian, Hadi
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Alitavoli, Majid
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Ameri, behnam
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Amini, Mohammad
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2020, Pages 601-608]
Amoushahi, Hossein
Bending and buckling solution of composite viscoelastic plate using the generalized exponential basis function method [Volume 6, Issue 2, 2019, Pages 190-199]
Anani, Yavar
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Arghavanian, Reza
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2020, Pages 649-656]
Asemani, samane
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Asghari -Arpatappeh, Fardin
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2020, Pages 541-548]
Asghharian Jeddi, Ali Asghar
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
Ashenai Ghasemi, Faramarz
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Azadi, Mohammad
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Azarafza, Reza
Experimental and numerical analysis of low-velocity impact on composite sandwich panels with grid stiffened core [Volume 6, Issue 4, 2020, Pages 615-626]
Azimpour Shishevan, Farzin
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2020, Pages 571-580]
B
Babollhavaejie, Mohammadreza
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2020, Pages 503-510]
Bagheri -Tirtash, Arsalan
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2020, Pages 525-532]
Bahramian, Ahmad Reza
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Bashiri Goodarzi, Hossein
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
Bavafa Bigdilou, Mansour
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2020, Pages 533-540]
Bazzaz, Ehsan
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Behzadi, Mansoureh
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
C
Cheloeian, Elham
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
D
Dadashi, Amin
Experimental and numerical investigation of buckling and post-buckling behavior of filament wound composite cylinders under lateral compression loading by parallel rigid plates [Volume 6, Issue 1, 2019, Pages 151-166]
Dadian, Alireza
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Darvizeh, Abolfazl
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Davar, Ali
Experimental and numerical analysis of low-velocity impact on composite sandwich panels with grid stiffened core [Volume 6, Issue 4, 2020, Pages 615-626]
E
Ebrahimnezhad-Khaljiri, Hossein
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2020, Pages 533-540]
Ebrahimnezhad-Khaljiri, Hossein
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2020, Pages 549-570]
Esfandeh, Masoud
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Eslami-Farsani, Reza
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Eslami-Farsani, Reza
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2020, Pages 495-502]
Eslami-Farsani, Reza
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2020, Pages 503-510]
Eslami-Farsani, Reza
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Eslami-Farsani, Reza
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2020, Pages 525-532]
Eslami-Farsani, Reza
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2020, Pages 533-540]
Eslami-Farsani, Reza
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2020, Pages 541-548]
Eslami-Farsani, Reza
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Eslami-Farsani, Reza
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2020, Pages 549-570]
Esmizadeh, Elnaz
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Etehadi, Elham
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
Eyvazi, Zahra
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Eyvazi, Zahra
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
F
Faraji Shoaa, Javad
Experimental and numerical analysis of low-velocity impact on composite sandwich panels with grid stiffened core [Volume 6, Issue 4, 2020, Pages 615-626]
G
Ghasemi-Ghalebahman, Ahmad
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
Ghoreishy, Mir -Hamidreza
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
H
Haddadpour, Hasan
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
Haghighi-Yazdi, Mojtaba
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
Hamzeloo, Reza
Damages Evaluation of low velocity impact on Glass/Polyester-foam sandwich panels using the Acoustic Technique [Volume 6, Issue 2, 2019, Pages 319-329]
Hashemi, Ramin
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Hashemi, Ramin
Evaluation of the elastic and plastic properties of Al/Brass/Al composite fabricated by roll bonding process via digital image correlation method [Volume 6, Issue 4, 2020, Pages 581-590]
Hayati, Ehsan
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2020, Pages 511-524]
Hedayatian, Mahdi
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Heidari-shahmaleki, Ehsan
Mechanical properties of laminated composites reinforced by natural fibers of cotton, wool and kenaf under tensile, flexural and shear loadings [Volume 6, Issue 1, 2019, Pages 99-108]
Hosseini, Seyedhossein
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Hosseinkhani, Milad
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
J
Jabbari Mostahsan, Amirhossein
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Jafari, Ali -Asghar
Nonlinear free vibration analysis of functionally graded rectangular plate using modified Lindstedt-Poincare method [Volume 6, Issue 4, 2020, Pages 637-648]
Jafari, Mohhamad
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
K
Kalantari, Shirin
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2020, Pages 601-608]
Kamali Dolatabadi, Mehdi
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
Kargar, Firooz
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Kargar, Firooz
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Khalili, Seyed Mohammad Reza
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Khalili, Seyed Mohammad Reza
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Khalili, Seyed Mohammad Reza
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Khavandi, Alireza
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2020, Pages 601-608]
Khodadadi, Amin
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Khosravi, Hamed
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Khosravi, Hamed
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
L
Liaghat, Gholamhossein
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
M
Madoliat, Reza
Experimental and Numerical Investigation of Effects of Stiffener in Buckling Resistance of square laminated composites with Circular Hole [Volume 6, Issue 1, 2019, Pages 43-52]
Maleki Khorasgani, Ali-reza
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate): part Ⅱ, Constrained Optimization [Volume 6, Issue 1, 2019, Pages 119-126]
Malekmohammadi, Hossein
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Malekzadefard, Keramat
Experimental and numerical analysis of vibration of FML- stiffened circular cylindrical shell under clamp-free boundary condition [Volume 6, Issue 1, 2019, Pages 9-20]
Masoumiasl, Soroush
Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under [Volume 6, Issue 3, 2019, Pages 351-362]
Moghimi Zand, Mahdi
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2020, Pages 511-524]
Mohammadi, Bijan
Experimental and Numerical Investigation of Effects of Stiffener in Buckling Resistance of square laminated composites with Circular Hole [Volume 6, Issue 1, 2019, Pages 43-52]
Mohammadi, Bijan
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Mohammadi, M. A.
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2020, Pages 503-510]
Mohammadi, Shohreh
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Mokhtari, Majid
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Mollazadeh, Mohammad
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2020, Pages 649-656]
Momeni, Amir
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Montazeri, Abbas
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2020, Pages 525-532]
Moosavian, Seyed Ashkan
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Moradi, Elham
Mechanical properties of laminated composites reinforced by natural fibers of cotton, wool and kenaf under tensile, flexural and shear loadings [Volume 6, Issue 1, 2019, Pages 99-108]
Moradi, Morteza
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Moradi, Morteza
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2020, Pages 591-600]
Mossaiby, Farshid
Bending and buckling solution of composite viscoelastic plate using the generalized exponential basis function method [Volume 6, Issue 2, 2019, Pages 190-199]
Mousavi-Mashhadi, Mahmoud
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
N
Naderi, Ali Asghar
Experimental and numerical analysis of vibration of FML- stiffened circular cylindrical shell under clamp-free boundary condition [Volume 6, Issue 1, 2019, Pages 9-20]
Naderi, Ghasem
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Naderi, Ghasem
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Naderi, Ghasem
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Najafi, Mohammad
Dynamic response of FG rectangular plate in contact with stationary fluid under moving load [Volume 6, Issue 2, 2019, Pages 213-224]
Najafzade Asl, omid
Numerical Investigation of the Parameters Affecting on the Composite Tubes Response under Axial Impact [Volume 6, Issue 2, 2019, Pages 200-212]
Nakhaei, Mohammad -Reza
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Nasrollahzadeh, Kourosh
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
Navarchian, Amir H.
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Nazari, Farid
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Nezamabadi, Alireza
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Niknam, Seyed Ali
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Noorian, Mohammad
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2020, Pages 627-636]
P
Palizvan, Arash
Bending and buckling solution of composite viscoelastic plate using the generalized exponential basis function method [Volume 6, Issue 2, 2019, Pages 190-199]
Payandehpeyman, Javad
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Pol, Mohammad Hossein Pol
Numerical Investigation of the Parameters Affecting on the Composite Tubes Response under Axial Impact [Volume 6, Issue 2, 2019, Pages 200-212]
Poormir, Mohammad Amin
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Poostan, Poorya
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
R
Radiom, Soheil
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Raeisi, Nezamoddin
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Rahimi, Gholamhossein
Experimental and numerical investigation of buckling and post-buckling behavior of filament wound composite cylinders under lateral compression loading by parallel rigid plates [Volume 6, Issue 1, 2019, Pages 151-166]
Rahimi, Gholamhossein
Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under [Volume 6, Issue 3, 2019, Pages 351-362]
Rahmatabadi, Davood
Evaluation of the elastic and plastic properties of Al/Brass/Al composite fabricated by roll bonding process via digital image correlation method [Volume 6, Issue 4, 2020, Pages 581-590]
Rahnama, Saeed
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Rajabi, Majid
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
Ranjbar, khalil
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Ravandi, Mohammad
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2020, Pages 627-636]
Refahi Oskouei, Amir
Damages Evaluation of low velocity impact on Glass/Polyester-foam sandwich panels using the Acoustic Technique [Volume 6, Issue 2, 2019, Pages 319-329]
Rohani, Abbas
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Rousta, Zahra
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
S
Saberi, Masoud
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Saboktakin, Abbasali
PROGRESSIVE DAMAGE ANALYSIS OF PLAIN WOVEN COMPOSITES UNDER TENSILE LOADING [Volume 6, Issue 4, 2020, Pages 609-614]
Safarabadi, Majid
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
Safarabadi, Majid
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2020, Pages 511-524]
Safizadeh, Mir Saeed
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2020, Pages 591-600]
Sahraeian, Razi
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Sanaei, Ali
Experimental analysis of tensile properties nanocomposites based on polypropylene/ Carboxylated Nitrile Rubber /Silica nano powder by using response surface methodology [Volume 6, Issue 2, 2019, Pages 275-282]
Sedighi, Mohammad
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Seraj, Rajabali
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Seraj, Rajabali
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Shahbakhsh, Soraya
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Shahmirzalo, Ali
Evaluation of the elastic and plastic properties of Al/Brass/Al composite fabricated by roll bonding process via digital image correlation method [Volume 6, Issue 4, 2020, Pages 581-590]
Shahrabi-Farahani, Alireza
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2020, Pages 525-532]
Shahrajabian, Hamzeh
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate): part Ⅱ, Constrained Optimization [Volume 6, Issue 1, 2019, Pages 119-126]
Shahrooz, Mehran
PROGRESSIVE DAMAGE ANALYSIS OF PLAIN WOVEN COMPOSITES UNDER TENSILE LOADING [Volume 6, Issue 4, 2020, Pages 609-614]
Shakibaei Nasab, Mohammad
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Shakouri, Meysam
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Shamaee-Kashani, Alireza
A novel model to predict the mechanical behavior of single-lap composite joints [Volume 6, Issue 1, 2019, Pages 89-98]
Shariyat, Mohammad
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Sheikhi, Mohammad Morad
Experimental analysis of tensile properties nanocomposites based on polypropylene/ Carboxylated Nitrile Rubber /Silica nano powder by using response surface methodology [Volume 6, Issue 2, 2019, Pages 275-282]
Shojaee, Taghi
Experimental and Numerical Investigation of Effects of Stiffener in Buckling Resistance of square laminated composites with Circular Hole [Volume 6, Issue 1, 2019, Pages 43-52]
Shokrieh, Mahmood Mehrdad
A novel model to predict the mechanical behavior of single-lap composite joints [Volume 6, Issue 1, 2019, Pages 89-98]
Siadati, S. M. Hossein
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2020, Pages 495-502]
Soltani, Mohammad
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
T
Taherian, Zahra
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
Taherkhani, Madhid
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Tohidlou, Esmaeil
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Tohidlou, Esmaeil
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Torabian, Maryam
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
V
Vahedi, Khodadad
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Y
Yarmohamad Toski, mehdi
An Experimental Investigation of Quasi-Static Indentation on A Composite Sandwich Panel Made of Basalt Fiber Using Nano-Graphene [Volume 6, Issue 1, 2019, Pages 109-118]
Yarmohammad Tooski, mehdi
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
Yarmohammad Tooski, Mehdi
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Yousef-Pour, Mardali
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
Z
Zadali Mohammad kotiyani, Mojtaba
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Zakizadeh, Amir Mohamad
Damages Evaluation of low velocity impact on Glass/Polyester-foam sandwich panels using the Acoustic Technique [Volume 6, Issue 2, 2019, Pages 319-329]
Zamani, Mohammad Reza
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2020, Pages 503-510]
Zamani Miandashti, Zahra
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
Zarei, Mohsen
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Zeinedini, Afshin
Mechanical properties of laminated composites reinforced by natural fibers of cotton, wool and kenaf under tensile, flexural and shear loadings [Volume 6, Issue 1, 2019, Pages 99-108]
Ziaei, Hamid
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Ziaei, Hamid
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Zolfaghari, Abbas
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]